Table tennis is a not-so-challenging sport to follow as you don’t have to spend much on buying facilities such as balls and sportswear. The only thing you need to invest in is Table Tennis Bat.
After playing for a long time, the paddle can slowly turn stiffer and less sticky than before, making the efficiency decrease. So, how to make ping pong paddle rubber sticky again? Let’s read this post to find out!
Testing The Stickiness Level
There are many different methods to check the stickiness level, but let us introduce you to our approaches. In our viewpoint, it was the most effective one.
First, put a paper sheet on the racket. Try swinging the paper as strong as possible. In case the paper still adheres to the racket, then that paddle is sticky enough.
Another way is to try playing on a ping pong ball. Put a ball on the racket, scrub the ball strongly on the rubber part to see whether it still stays on the racket after scrubbing.
If the ball cannot stick, then you have to read the below section to learn how to make ping pong rubber sticky again.
How To Make Table Tennis Paddle Rubber Sticky
When your paddle becomes less sticky than before, the performance can be influenced. With the low stickiness, the ball can bounce back more, making it difficult to score a point.
Therefore, we will learn the first tips on making the racket rubber stickier.
It’s obvious that “prevention is better than treatment” when it comes to product maintenance. If you want your tool to be new and high-quality, you must maintain it properly.
For the Table Tennis Racket, the maintenance requirement is simple: just clean it and cover it appropriately. After each practice session, just use a soft, clean, sterilized towel, soak it in water or alcohol, and then rub it on the paddle. Let the racket dry after cleaning.
This step helps remove dust and debris, which makes the paddle less sticky. You may do this step twice per month.
Sometimes, even though you tried your best to maintain the paddle, its rubber still loses the stickiness. Then, we have to apply a stronger method: using supplements.
First, we want to advise using glue to maintain the stickiness of the Tennis Table Racket. Based on our experience, you should apply this tip only when there is an emergency case scenario because the glue can damage the paddle if overused.
Then, how to apply glue on a ping-pong paddle? Well, the answer is: Just use a brush, lightly spread the glue onto the paddle’s surface.
You may worry that the glue may be too adhesive and leave residue on the paddle. But in fact, if you paste just a thin layer, leave it dry for about 3 – 6 hours, then there will be no residue.
If using glue may not be the safest approach for your paddle, you can consider using foam as another supplement. We choose butterfly foam as it provides the best effect on increasing stickiness.
Differentiated from glue, butterfly foam can dry quickly after you squirt it on the paddle. Just leave for a few minutes, and the ping-pong paddle turns back stickiness and shiny like the new one.
You can also use sunflower oil to boost the stickiness of your Table Tennis Racket. The process is just like applying other supplements: spread sunflower oil over both sides of the paddle with a small brush. Then leave it to dry for about 10-12 hours.
Among all supplements on this list, we think that sunflower oil (or any other oil type if not available to buy sunflower one) is the cheapest, fastest way. However, it is just for temporary use. After a month, you must brush it again.
Therefore, we recommend using this approach only when you are in a rush and cannot find any other solutions and supplements available.
According to the International Table Tennis Federation (ITTF), it’s illegal to use boosters in professional competitions but still available to use in daily practice. So, why not use this supplement?
The procedure is simple: apply the boosters onto both sides of the paddle. Then, leave them dry for at least 24 hours. You can feel the paddle faster immediately later as this substance can increase the stickiness of rubber and ball’s speed.
If you demand even more, then spray the boosters twice. For this second time, just leave it outside for 12 hours, and the paddle is ready to use.
Replace The Rubber
If you don’t have much time to research how to make ping pong paddle sticky, then let’s do the fastest way: replace the rubber.
Then your performance can be improved remarkably, and you will understand why it is a must to replace the new rubber periodically.
However, we don’t advise you to buy any rubber available because the rubber’s quality can influence your playing. You have to tailor the rubber type you are using, the brand you prefer most, etc., to choose the best alternative.
Cover The Paddle
Cover the paddle
The simplest but sometimes the top effective method is to cover the paddle. The rubber becomes less sticky after being used many times, so to protect it, you can consider decreasing the interaction between the Table Tennis Racket and the ball.
To be specific, it would be helpful if you cover the paddle with a protective film or spraying a protective layer to protect the paddle’s rubber. Not only does it decrease the chance of interaction, but this protective layer can also avoid dust and dirt.
Wrapping It Up
We have discussed how to make ping pong paddle rubber sticky through this post. The top 4 tips mentioned above are the most effective ones based on our experience.
No matter which method you choose, the most important thing you have to remember is to try not to crush the paddle too strongly or cover it with protective materials. Remember that, and you don’t have to use many supplements later.